Stop Replacing Concrete. Start Protecting It.
One application. 10-year warranty. GoNano Concrete Saver penetrates at the molecular level — making your concrete 2× stronger and impervious to water, salt, UV, and stains.
See the Difference
Traditional sealers sit on top and peel. GoNano penetrates the concrete itself — creating permanent protection that can't flake, bubble, or wear away.
Before & After Treatment
Left: untreated, porous. Right: GoNano-sealed, hydrophobic.
With vs. Without GoNano
Staining, moss growth, and deterioration — eliminated.
Not a Coating. A Molecular Transformation.
Traditional sealers create a film on top of concrete that peels, bubbles, and needs reapplication every 1–2 years. GoNano Concrete Saver is fundamentally different — its nano-silica particles (1000× smaller than a micrometer) penetrate deep into the concrete's pore structure and create permanent covalent bonds.
The result? Your concrete becomes its own sealer. No surface film to peel. No recoating needed. Just concrete that's 2× stronger and permanently protected from the inside out.
Same science, proven at scale: Nano-silica modification has been used in highway engineering and airport runways for over a decade. GoNano adapted this industrial-grade technology for residential and commercial concrete surfaces.
Particle Size
<1μm
1000× smaller than traditional sealers
What It Protects Against
Six critical threats to your concrete — all neutralized with a single application.
Water & Moisture
Creates hydrophobic barrier — water beads and rolls off instead of penetrating
Freeze-Thaw & Salt
Blocks salt and chlorine penetration that causes spalling and cracking
UV Radiation
Reflects UV rays, limits heat absorption, slows aging and discoloration
Biological Growth
Prevents cyanobacteria, moss, and algae from taking hold on surfaces
2× Stronger
Nano-silica bonds molecularly with concrete, doubling compressive strength
Stain Resistance
Oil, grease, and tire marks wipe clean — no more permanent staining
Surfaces We Treat
Any concrete, paver, or stone surface — residential or commercial.
Driveways
Protect your most visible concrete surface
Garage Floors
Oil-resistant, dust-free, easy to clean
Pavers & Patios
Restore color and prevent joint erosion
Pools & Decks
Protect pool decks from chlorine, salt, and sun damage
Also protects:
Traditional Sealers vs. GoNano Concrete Saver
Why homeowners are switching from recoating every year to a single permanent treatment.
| Feature | Traditional Sealers | GoNano Concrete Saver |
|---|---|---|
| How it works | Surface coating (sits on top) | Penetrates & bonds molecularly |
| Reapplication | Every 1–2 years | Single application, 10-year warranty |
| Peeling / Flaking | Common after 6–12 months | Impossible — no surface film |
| Strength increase | None | 2× compressive strength |
| Appearance | Glossy/wet look (fades) | Natural matte or enhanced finish |
| Eco-friendly | Often contains VOCs | OSHA biodegradable, non-toxic |
| Non-slip | Can reduce traction | Maintains or improves traction |
| 10-year cost | $3,000–$5,000+ (5 reapplications) | $800–$2,000 (one application) |
GoNano Concrete Saver
One-Day Application
Applied by spray, roller, or brush. Dry in 2–4 hours, full cure in 24–48 hours.
10-Year Warranty
Backed by GoNano's manufacturer warranty. No reapplication needed.
Safe for Everyone
Non-toxic, VOC-free, OSHA biodegradable. Safe around kids, pets, and landscaping.
Fraction of Replacement Cost
Typical driveway treatment: $800–$2,000 vs. $5,000–$12,000 to tear out and repour.
What Customers Say
"We had GoNano Concrete Saver applied to our aging concrete driveway and steps. In previous years, we regularly dealt with small cracks and heavy salt staining. After treatment, the surface showed noticeably reduced staining and no new cracking through the winter season."
Rob Cooper
Ontario · GoNano Customer
"I had GoNano Concrete Saver applied to the foundation of my home to help protect against water exposure and freeze-thaw cycles. The application was completed quickly and professionally."
Ed Morgan
New York · GoNano Customer
"Living in Alberta means constant exposure to salt, moisture, and extreme temperature swings. We had GoNano Concrete Saver applied to our concrete steps and rear slab. After a full winter cycle, no new cracks have developed."
R. Manning
Alberta · GoNano Customer
Why SD Concrete Needs Protection
San Diego's year-round UV exposure is brutal on concrete. While you don't deal with freeze-thaw cycles, the intense sun causes oxidation, fading, and surface degradation that makes concrete look decades older than it is.
Pool decks face constant chlorine exposure. Coastal properties deal with salt air corrosion. And every driveway in SD gets punished by heat cycling — expanding and contracting daily, creating micro-cracks that traditional sealers can't stop.
GoNano's UV reflection mechanism is specifically relevant here — it's the same science that protects your roof shingles, now applied to your concrete.
SD Concrete Threats
How We Apply GoNano Concrete Saver
A professional, single-day process. No heavy equipment, no concrete removal, no multi-day disruption. Here's exactly what happens when we treat your concrete.
Surface Preparation
We power wash and clean the concrete surface, removing all dirt, debris, oil stains, and biological growth. The surface must be completely clean and dry for optimal penetration.
Any existing cracks are repaired. Oil stains are pre-treated. Surface must be dry 24 hours before application.
Masking & Protection
Adjacent surfaces — landscaping, painted areas, windows, and garage doors — are protected with plastic sheeting and painter's tape to prevent overspray.
While GoNano is non-toxic and biodegradable, we protect surrounding areas for a clean, professional finish.
GoNano Application
The treatment is applied evenly using a professional pump sprayer in a single coat. Coverage is approximately 200 sq ft per liter. The product penetrates into concrete pores — no surface film.
Applied by spray for large areas, roller or brush for edges and detail work. One coat is all that's needed.
Verification & Cure
After 2–4 hours of drying, we perform a water bead test to confirm the hydrophobic barrier is active. Full molecular cure completes in 24–48 hours.
You can walk on the surface after 4 hours. Vehicle traffic after 24 hours. Full protection active at 48 hours.
1 Day
Total Process
1 Coat
Single Application
48 hrs
Full Cure Time
10 yrs
Warranty Coverage
Video Proof — GoNano Concrete Saver
Don't take our word for it. Watch the hydrophobic barrier in action, see real-world long-term results, and watch the full application process.
Hydrophobic Protection Demo
Watch water bead and roll off a GoNano-treated concrete surface — proof the molecular barrier is working.
10+ Year Waterproofing Test
Real-world test on a 4-year-old treated surface showing the treatment still performing after years of exposure.
Concrete Treatment in Action
Full demonstration of the GoNano Concrete Saver application process and water protection results.
Frequently Asked Questions
Everything you need to know about GoNano Concrete Saver — from application to long-term performance.
Protect Your Concrete — One Application, 10 Years
Get a free quote for your driveway, patio, garage floor, or commercial surface. We'll assess your concrete and recommend the right treatment plan.